AIRWORTHINESS DIRECTIVES
For Swift ADs click on link above then follow instructions below.
On the left side of the page under "Current ADs" click on "By Make"
Next click on letter "S" then scroll down to "Swift Museum Foundation, Inc",
click on the blue arrow next to those words and go from there.

SUPPLEMENTAL TYPE CERTIFICATES
For Swift STCs click on link above then follow instructions below.
On the left side of the page under "Supplemental Type Certificates" click on "By Make".
Next click on letter "S" then scroll down to "Swift Museum Foundation, Inc",
click on the blue arrow next to those words and go from there.

SAMPLES OF SUPPLEMENTAL TYPE CERTIFICATES

Sample summary of Federal Aviation Administration Supplemental Type Certificates. This summary is not complete and may contain out-of-date information, particularly in regards to the name/address of the STC holder. It is included here just to give you an idea of just how modified Swifts are! Use the link to the STC sction of the FAA website to get the latest info.

AVIONICS, INSTRUMENTS and SYSTEMS

WINDSHEILDS

ENGINES, PROPS, COWLINGS, & SPINNERS, ETC.

AVIONICS, INSTRUMENTS and SYSTEMS

Digital EGT/CHT: For Globe GC series. STC#: SA1626NM
Description: Installation of Electronics Int'l Digital EGT/CHT instruments and accessories. Electronics Int'l Inc. 5289 N.E. Elam Young Parkway #G200, Hillsboro, OR 97124

Digital automatic engine analyzer: For Globe GC Series. STC#: ST4302NM
Description: Installation of Electronics Intn'l digital automatic engine analyzers. Electronics Int'l Inc. 5289 N.E. Elam Young Parkway #G200, Hillsboro, OR 97124

EGT installation: For Globe GC-1 series. STC#: SA1512WE
Description: Installation of gas temperature monitoring systems Model EGT-1. KS Avionics, 18145 Judy Street, Castro Valley, CA 94546.

EGT with rising temp alarm installation: For Globe GC-1series. STC#: SA2105WE
Description: Installation of Model EGT-3 exhaust gas temperature monitor (with rising temperature alarm). KS Avionics, 18145 Judy Street, Castro Valley, CA 94546.

Carb ice detection system: For Globe GC-1A,-1B series. STC#: SA308EA
Description: Installation of A.R.P. Industries, Inc. carburetor ice detection system 105AP. Continental, Franklin, and Lycoming type engines equipped with Marvel-Schebler MA-2, MA-3, MA-3SPA, MA-4, MA-4-5, MA-6, and HA-6 series carburetors. Alfred R. Puccinelli, DER 1-145, 36 Bay Drive Ease, Huntington, L.I., NY 11743

Carb ice detection system: For Globe GC-1A,-1B series. STC#: SA489EA
Description: Installation of A.R.P. Industries, Inc. carburetor ice detection system 107AP-12 or 107AP-24. Continental, Franklin, and Lycoming type engines equipped with Marvel-Schebler MA-2, MA-3, MA-3SPA, MA-4, MA-4-5, MA-6, and HA-6 series carburetors. Alfred R. Puccinelli, DER 1-145, 36 Bay Drive Ease, Huntington, L.I., NY 11743

WECO carb temp monitor: For Globe GC-1A,-1B series. STC#: SA1177WE
Description: WECO carburetor temperature monitor. Richard P. Winnen, 21328 Grace Ave, Torrance, CA 90510

Mixture monitor: For Globe GC-1A,-1B series. STC#: SA1315WE
Description: Installation of Tri-Star Corp. mixture monitor (exhaust gas temperature probe, gage, and selector). Universal Corporation, 730 Independent Ave, Grand Junction, CO 81501

KS Avionics EGT/CHT: For Globe GC-1A,-1B series. STC#: SA2557NM
Description: Installation of KS Avionics EGT/CHT-2 combined exhaust gas and cylinder head temperature monitoring system> EAA AVN Foundation, INC., Witman Field, Oshkosh, WI 54903-3065

Precise Flight standby vacuum system: For Globe GC-1A,-1B series. STC#: SA2683NM
Description: Precise flight standby vacuum system. Precise Flight, Inc. 63120 Powell Butte Road, Bend, OR 97701

Brittain Model BSS stability augmentation system: For Globe GC-1A,-1B series. STC#: SA2996SW
Description: Brittain Model BSS stability augmentation system. Brittain Industries, Inc. 3266 N. Sheridan Road, Tulsa, Oklahoma 74115 phone:918-836-7701, fax: 918-836-7703 www.brittainautopilots.com

Mitchell autopilot: For Globe GC-1A,-1B series. STC#: SA3088SW-D
Description: Mitchell automatic flight system AK564 consisting of Centruy I autopilot with optional omni tracker. Century Flt Systems, Inc. F.M. 1195, P.O. Box 610, Mineral Wells, TX 76067

JPI tachometer: For Globe GC-1A,-1B series. STC#: SA00061LA
Description: Installation of JPI tachometer. J P Instruments, 9621 Bay Meadow Dr, Huntington Beach, CA 92646

Carb ice detector: For Globe GC-1A,-1B series. STC#: SA00081NY
Description: Installation of carburetor ice detector. Iceman Aviation Supplies, 1509-215 Parkdale Avenue, Ottawa, Ontario, Canada K1Y 4T8

Narco Omnigator

Back to the top

WINDSHEILDS

Windshield: For Globe GC-1A,-1B series. STC#: SA2-226
Description: Windshield manufactured in accordance with Luminous Plastics. LP Aero Plastics, Inc., RD#1, Box 201B, Jeanette, PA 15644

Windshield, heavy duty "bubble": For Globe CG-1A,-1B series. STC#: SA4-403
Description: GC-1-1 heavy duty "bubble" windshield. Aircraft Windshield Co. 10871 Kyle Street, Los Alamitos, CA 90720. (562) 430-8108

Windshield, heavy duty "bubble": For Globe GC-1A,-1B. STC#: SA4-761
Description: GC-1-3 heavy duty "bubble" windshield. Aircraft Windshield Co. 10871 Kyle Street, Los Alamitos, CA 90720. (562) 430-8108

Back to the top

ENGINES, PROPS, COWLINGS, & SPINNERS, ETC.

Cont O-300-A w/prop & spinner: For Globe GC-1B series. STC#: SA1-326
Installation of Teledyne Continental Model O-300-A engine with McCauley Model 1A170-DM7359 propeller and Cessna spinner AK7053-3. Swift Museum Foundation, Inc., P.O. Box 644, Athens, Tn 37303

Cont C-145, O-300-A or -B w/Aeromatic or McCauley prop: For Globe GC-1B series. STC#: SA4-145
Description: Cont C-145-2, O-300-A or -B engine & Universal F200/0073-E, F200-H/0073-E, or McCauley 1A170DM/7361 propeller. M.E. Bodell, 23804 Pennsylvania Ave, Torrance, CA 90501

Cont IO-360 w/McCauley prop: For Globe GC-1B series. STC# SA53NW
Description: Installation of Continental IO-360 series engines with McCauley prop. Merlyn Products, Inc., 7500 West Park Drive, Spokane, WA 99224.

Cont O-300-A: For Globe GC-1B series. STC# SA60WE
Description: Installation of Continental O-300-A engine. Vaeth Aircraft REpair, 13th and Benson Streets, Upland, CA 91786.

Lyc IO-360-C or D w/McCauley prop: For Globe GC-1B series. STC#SA275NW
Description: Installation of Lycoming IO-360-C or D series engines and McCauley D2A34C67/76C-s propeller. Merlyn Products, Inc., 7500 West Park Drive, Spokane, WA 99224.

Franklin Engine w/McMauley prop: For Globe GC-1B series. STC#203NW
Description: Installation of Franklin 6A-350-C1 engine and McCauley 2A34C22/SF84-10 prop. Merlyn Products, Inc., 7500 West Park Drive, Spokane, WA 99224.

Cont C-145 w/gross weight increase: For Globe GC-1B series. STC#SA382NW
Description: Installation of Continental 145 engine, and gross weight increase to 1835 lbs. Merlyn Products, Inc., 7500 West Park Drive, Spokane, WA 99224.

Gross weight increase: For Globe GC-1B series. STC#SA389NW
Description: A gross weight increase to 1970 lbs. Merlyn Products, Inc., 7500 West Park Drive, Spokane, WA 99224.

Cont IO-360 engine, cowling, baffling, spinner, relocated battery added to STC SA53NW: For Globe GC-1B series. STC#SA564GL
Description: Installation of Cont IO-360 engine per STC SA53NW and further modified with new engine baffling, Alturair cowling, relocated battery box, and Cessna propeller spinner. Also included is the installation of an Aero Instruments, p/n PH500 heated pitot tube and flush mounted static port. Hill Brothers Avn Inc., Pekin, IL 61554.

Lyc O-360-AIA w/McCauley prop: For Globe GC-1B series. STC#SA803SO
Description: Installation of Lycoming O-360-A1A engine equipped with a McCauley model 2D34C53-A/74E-0 propeller. Aeronautical Engr. Inc., P.O. Box 602, Miami, FL 33148.

Sensenich 62 inch pitch prop for C-145: For Globe GC-1A series. STC#: SA1-335
Description: Sensenich 62-inch pitch propeller M74DR-1 on aircraft equipped with Cont C-145-2 engine. Rudolph chalow, R.D. 1, Newfield, N.J. 08344

Down-draft cowling & baffles: For Globe GC-1B series. STC# SA68SO
Description: Down-draft cowling and baffles for Swift. Swift Alturair, 1780 Joe Crosson Drive, El CAjon, CA 92026.

BN-1 spinner: For Globe GC-1a,-1B series. STC#: SA4-302
Description: Installation of BN-1 spinner. ACS Products Co., Ind, 1585 Coppeer Drive, P.O. Box 152, Lake havasu city, AZ 86403

Delco generator/regulator: For Globe GC-1A,-1B series. STC#: SA4-1200
Description: Installation of Delco-Remy generator 1101879 and regulator 1118384. Universal Aircraft, P.O. Box 5306, Denver, CO 80217

Engine charge air-air filter: For Globe GC-1A,-1B series. STC#: SA69NW
Description: Installation of Matney's engine charge air-air filter assembly. D.H. Matney, d/b/a Mtney's Aircraft Service, 24415 116th S.E., Kent, WA 98031

Mixture setting system: For Globe GC-1B series. STC#SA00215NY
Installation of CAVU Model AM100 AVMIX engine fuel/air mixture setting system. CAVU Products Limited, 2325 Mountland Drive, Peterborough, Ontario, Canada K9K 1W3.

Air Filter: For Globe GC-1B series. STC#SA71GL
Description: Installation of air filters. Brackett Aircraft Co., 7045 Flightline Drive, Kingman, AZ 86401.

Back to the top

LANDING GEAR

Cleveland wheel/brake: For Globe GC-1A,-1B series. STC#SA2GL
Description: Installation of wheel and brake assemblies and axle spacer. Aircraft Wheel & Brake Division, Parker Hannifin Corp., 1160 Center Road, Avon, OH 44011

Stainless steel brake discs: For Globe GC-1A,-1B series. STC#SA2231SO
Description: Replacement of Cleveland brake discs P/N164-43 or 164-143 with Appalachian Accessories' stainless steel brake discs, P/N75-43. Appalachian Access., Inc. Tri-City Airport Station, Blountville, TN 37617

Stainless steel brake discs: For Globe GC-1A,-1B series. STC#: SA3001SO
Description: Installation of Appalachian Accessories, stainless steel brake discs, P/N75-43. Aviation Products, Inc., 1400 East South Boulevard, Montgomery, AL 36116.

Melonite steel brake discs: For Globe GC-1A,-1B series. STC#: SA00197AT
Description: Installation of Appalachian carbon steel brake discs that have melonite surfacr treatment. Aviation Products, Inc., 1400 E. South Blvd, Montgomery, AL 36116

Pneumatic squat switch: For Globe GC-1A,-1B series. STC#: SA2098SO
Description: Installation of a pneumatic squat switch on the landing gear retraction system. James H. Thomason, Rt 1, Hwy 39, Mountville, SC 29370

Extended length gear door fairings: For Globe GC-1A,-1B series. STC#: SA4011WE
Description: Installation of extended length gear door fairings. Monte L. Zema, Route 4, Box 195, Colville, WA 99114.

Replacement landing gear retraction link: For Globe GC-1A,-1B series. STC#: SA7891SW
Description: Installation of a replacement landing gear retraction link. Mr. William D. Walker, 606 Red Bluff Road, Piper Creek, TX 78063

Bosch 4 pole electric gear motor: For Globe GC-1B series. STC#SA169NW
Description: Installation of modified Bosch 4 pole electric motor & adapter plate as a replacement drive motor to the hydraulic system. Merlyn Products, Inc., 7500 West Park Drive, Spokane, WA 99224.

Hyd Hand Pump: For Globe GC-1B series. STC#SA3313WE
Description: Installation of Dowty Equipment Co. hand pump. Rendco, 1021 W. Holguin, Lancaster, CA 93534.

Back to the top

AIRFRAME

Smooth skin outboard wing panels: For Globe GC-1A,-1B series. STC#2321WE
Description: Installation of smooth skins with internal chordwise stringers for outboard wing panel in lieu of beaded skins. Jess H. Meyers, 1410 Western Ave., Las Vegas, NV 89102-2602

Bonanza wing tips: For Globe GC-1B series. STC#SA4-156
Description: Installation of slightly modified early model Beech Bonanza wing tips. M.E. Bodell, 23804 Pennsylvania Ave, Torrance, CA 90501

Fiberglas wing tips: For Globe GC-1B series. STC#SA4-395
Description: Fiberglas wing tips. Wendell W. Tweed, 5726 Buffalo Ave, Van Nuys, CA 91408

Relocation of battery & tail ballast removal: For Globe GC-1B series. STC#SA149CE
Description: Relocation of battery and removal of tail ballast. Ernest R. Blatchley, 132 Seminole Dr., W. Lafayette, IN 47906

Installation of access door aft of luggage compartment: For Globe GC-1B series. STC#SA167NW
Description: Installation of access door aft of luggage compartment. Merlyn Products, Inc., 7500 West Park Drive, Spokane, WA 99224.

Rudder cap: For Globe GC-1B series. STC#SA563NW
Description: Install Swift Alturair rudder cap. Merlyn Products, Inc., 7500 West Park Drive, Spokane, WA 99224.

Fiberglas wing tips: For Globe GC-1B series. STC#SA2358WE
Description: Installation of fiberglas wing tips. Swift Tech Co., 503 Murray Drive, El Cajon, CA 92020.

Back to the top

FUEL SYSTEM

Auxiliary fuel tanks: For Globe GC-1B series. STC#SA452NW
Installation of auxiliar fuel tanks. Merlyn Products, Inc., 7500 West Park Drive, Spokane, WA 99224.

Auxiliary fuel tanks: For Globe GC-1B series. STC#SA255SO
Description: Auxiliary fuel tanks. Swift Tech Co., P.O. Box "P", Santee, CA 92071

Electric fuel pump: For Swift GC-1B series. STC#SA345SO
Description: Electric fuel pump Piper p/n48-666; cockpit hatch & side glasses with fiberglas canopy. Swift Museum Foundation, Inc., P.O. Box 644, Athens, Tn 37303

Auto gas operation: For Swift GC-1A,-1B series. STC#: SA2137CE
Description: Operation of airplane on unleaded automotive gasoline, 87 minimum antiknock index and leaded automotive gasoline, 88 minimum anitknock index (RON+MON)/2. Petersin Aviation, Inc. Route 1, P.O. Box 18, Minden, NE 68959

Auto gas operation: For Globe GC-1B series. STC#SA2137CE
Description: Operation of airplane on unleaded automotive gasoline, 87minimum antiknock index and leaded automotive gasoline, 88 minimum anitknock index (RON+MON)/2. Petersen Aviation, Route 1, Box 18, Minden, NE 68959.

Back to the top

MISCELLANEOUS

Beltmaster shoulder harness: For Swift GC-1A,-1B series. STC#: SA1843NM
Description: Installation of Beltmaster shoulder harness. Monte L. Zema, Route 4, Box 195, Colville, WA 99114

Precise Flight pulselite: For Swift GC-1A,-1B series. STC#: SA2622NM
Description: Precise Flight pulselite. Precise Flight, Inc. 63120 Powell Butte Road, Bend, OR 97701

Precise Pulselite: For Swift GC-1A,-1B series. STC#: SA4005NM
Description: Installation of Precise Pulselite control uit in landing/taxi system. Precise Flight, Inc. 63120 Powell Butte Road, Bend, OR 97701

Burglar alarm system: For Swift GC-1A,-1B series. STC#: SA5656NM
Description: Installation of burgular alarm system. Thompson Aero Security, P.O. Box 2361, Gig Harbor, WA 99206.

Elev trim relocation: For Swift GC-1B series. STC# SA4-157
Description: Relocation of trim control handle to left side of fuselage about 9 inches below window & about 9 inches to rear of instrument panel. M.E. Bodell, 23804 Pennsylvania Ave, Torrance, CA 90501

Rear seat and/or instrument panel: For Swift GC-1B series. STC# SA124CE
Description: Rear seat and/or instrument panel. Charles L. Stutesman, Wheeler Rdl, Route 31, Kansas City, MO 64108

Dual control sticks: For Swift GC-1B series. STC#SA4061WE
Installation of dual control sticks. Charles F. Lischer, Jr., 1732 Ano Nuevo, Diamond Bar, CA 91765.

Gull wing canopy: For Globe GC-1B series. STC#SA4727NM
Description: Installation of a new gull-wing canopy and canopy locking system. Harley L. Howell, East 14815 16th Avenue, Veradale, WA 99037.

Dual control sticks: For Globe GC-1B series. STC#SA4855NM
Description: Installation of dual-stick flight control system. The Aeroplane Factory, P.O. Box 1551, Minden, NV 89423.

Dual control sticks: For Globe GC-1B series. STC#SA00910AT
Description: Installation of control stocks. James H. Thomason, RT 1, Hwy 39, Mountville, SC 29370.

Cockpit hatch & side glasses with fiberglas canopy: See electric fuel pump STC.

Back to the top

the globe temco swift homepage
home / calendar / scrapbook / for sale / words and pictures / flight instructors
serial numbers / factory photos / history / answer man archive / shops and mechanics
type certificate / stc / 337 / regional swift wings / swift museum foundation
swift owner homepages / links / chats